- Release the hood latch and open the hood.
- Unplug the wire harness from the back of the headlight bulb.
- Remove the rubber gasket protector cover the back of the headlight.
- Locate the locking spring on the back of the headlight.
- Remove the old bulb and install the new one.
Furthermore, how do you change a headlight on a 2011 Toyota Sienna?
Another frequent question is, how do you change a headlight on a 2010 Toyota Sienna?
Also know, how do you change a headlight on a 2014 Toyota Sienna?
Also, how do you change a headlight on a 2004 Toyota Sienna?
Contents
How do you change a headlight on a 2002 Toyota Sienna?
How do you change a headlight on a 2003 Toyota Sienna?
How do you change a headlight on a 2012 Toyota Sienna?
How do I adjust my headlights?
How do you adjust the headlights on a 2009 Toyota Sienna?
How do you change a headlight on a 2013 Toyota Sienna?
Where should my headlights be aimed?
The top of the low beam shining on the wall should be at or slightly below the height of the center of the headlight lens for most vehicles. You should expect the light pattern to be higher on the right side (passenger side) to illuminate road signs and lower on the driver’s side to prevent blinding other drivers.
How do you check your headlight alignment?
Measure the distance from the ground to the headlights to ensure the suspension is level. Check the inclination value on the headlight. It’s usually on the shell of the reflector. 1% means the low beam tilts 10cm for every 10m, and 1.2% means the low beam tilts 12cm for every 10m.
How do you adjust headlights horizontally?
Adjust vertical aim. The horizontal line on the headlights should drop 1-2 inches down from the marked lines when parked 25ft back from the wall. Use the vertical adjustment screw to adjust the height of the headlights as necessary.