People also ask, how do I turn off the maintenance required light on my Toyota Sienna? Press and hold the “Trip” stem button on the odometer. Continue to hold the “Trip” button while switching the ignition to “On” without starting the engine. For push button ignition models, press the button once. Release the “Trip” button when the trip meter is set to all zeros, and you’re done.
Additionally, how do you reset the maintenance required light on a 2006 Toyota Sienna? Turn off the car, and hold down the odometer button. Turn the key to the on position without starting the car. Wait for the maintenance light to blink and go out, while still holding down the button. Finally, release the button and turn the key to the off position.
Another frequent question is, what does the maintenance required light mean on a 2007 Toyota Sienna? Toyota Maintenance Required Light: This light comes on to remind you to change your oil. It comes on 5,000 miles after the last time it was reset. … Sometimes shops neglect to reset the maintenance-required meter if the light doesn’t happen to be on yet when they are changing the oil.
Also know, where is the VSC button on a 2007 Toyota Sienna? To reset the VSC light in the Toyota Sienna You will want to first make sure the car is parked on level ground and that the car is in park. Look on the dashboard where the VSC button is below the light. Hold it down for about 10 seconds and wait till You hear a beep. Once You hear the beep let go of the light.
Contents
Why is my maintenance required light still on after oil change?
Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.
Why is the maintenance required light on?
The purpose of the maintenance required light is to encourage drivers to take their vehicle in for regular scheduled maintenance, such as oil changes, spark plugs, new tires, etc. Normally, automotive specialists will reset the maintenance required light when servicing your vehicle.
How do you reset the maintenance required light on a 2005 Toyota Sienna?
Press and Hold the “Odometer Trip Reset” Button. While Holding, Turn the Key to the “On” Position. Continue holding the “Odometer Trip Reset” button until the “Maintenance Required” light blinks several times and turns off. Once the “Maintenance Required” light is off, release the “Odometer Trip Reset” button.
What does maintenance required light mean on Toyota Sienna?
What Does Maintenance Required Light Mean on Toyota Sienna? The maintenance required light on Toyota Sienna is an indication that comes after you have driven for 5,000 miles. After this time, your car needs an oil change and routine services to work in the best possible manner.
Can I drive with maintenance required light on?
Secondly, resetting the maintenance required light after you have changed the oil restarts the counter. As a result, you can drive safely on roads and after 5,000 miles, this light will automatically remind you it’s time for a new oil change, so you don’t have to count the miles manually.
How do I turn off the maintenance required light?
How do you turn off the maintenance required light on a Toyota push start?
Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out.
How do I fix my check engine VSC TRAC off warning lights?
How do I reset my Toyota VSC light?
- Make sure you are completely stopped. Put the car in park if you can.
- Press and hold the VSC button for a few seconds.
- The TRAC OFF and VSC OFF indicator light will come on. Both systems are now off.
- Press the VSC button again. Both lights will turn off and the systems are now reengaged.