Briefly click the odometer knob until you see “trip a â». Next, press the “off” ignition and hold the reset trip odometer button, and turn the ignition switch to the “on” position. Continue holding down the reset trip odometer button until the display shows “000000” miles, and the maintenance light turns off.
Likewise, how do you reset the maintenance light on a 2014 Toyota Sienna?
Additionally, how do you turn off the maintenance required light on a 2015 Toyota Sienna?
Furthermore, how do you reset the maintenance light on a Toyota Sienna 2021? Press and hold the “Trip” stem button on the odometer. Continue to hold the “Trip” button while switching the ignition to “On” without starting the engine. For push button ignition models, press the button once. Release the “Trip” button when the trip meter is set to all zeros, and you’re done.
Another frequent question is, how do you reset the maintenance required light on a 2010 Toyota Sienna?
- With vehicle ignition switched to ON position, make sure odometer reading is shown, then turn the ignition switch to OFF position.
- While holding reset button, switch ignition to ON position.
- Continue to hold the reset button until the odometer displays “000000” and/or the MAINT REQD light goes off.
Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out.
Contents
How do I turn off maintenance required light?
- Turn Your Vehicle on. Your key should be switched to the on position and look on your dashboard.
- Turn the Vehicle Off and Press the Trip Meter Reset Button.
- Turn the Vehicle Back on.
- Keep the Reset Button Pressed.
- Release the Reset Button.
What does maintenance required light mean on Toyota Sienna?
What Does Maintenance Required Light Mean on Toyota Sienna? The maintenance required light on Toyota Sienna is an indication that comes after you have driven for 5,000 miles. After this time, your car needs an oil change and routine services to work in the best possible manner.
How do you reset the maintenance required light on a 2008 Toyota Sienna?
How do you turn off the maintenance required light on a 2011 Toyota Sienna?
How do you reset the maintenance required light on a 2012 Toyota Sienna?
Why is my maintenance required light on after oil change?
Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.
Briefly click the odometer knob until you see “trip a â». Next, press the “off” ignition and hold the reset trip odometer button, and turn the ignition switch to the “on” position. Continue holding down the reset trip odometer button until the display shows “000000” miles, and the maintenance light turns off.
Is the maintenance required light the same as check engine?
Some drivers may confuse the service required or maintenance required light on the gauge cluster for the check engine light. These warning lights are unrelated. The service required light just means the car is due for an oil change or other routine care. It is not an indicator of trouble like the check engine light is.
How do you turn off the maintenance required light on a Toyota Tacoma 2020?
How often should I change my oil?
Depending on vehicle age, type of oil and driving conditions, oil change intervals will vary. It used to be normal to change the oil every 3,000 miles, but with modern lubricants most engines today have recommended oil change intervals of 5,000 to 7,500 miles.