Considering this, how do you reset the maintenance light on a 2005 Toyota Sienna?
- Turn the Key to the “Off” Position.
- Press and Hold the “Odometer Trip Reset” Button.
- While Holding, Turn the Key to the “On” Position.
- Continue holding the “Odometer Trip Reset” button until the “Maintenance Required” light blinks several times and turns off.
Furthermore, how do I turn off the maintenance required light on my Toyota Sienna? Press and hold the “Trip” stem button on the odometer. Continue to hold the “Trip” button while switching the ignition to “On” without starting the engine. For push button ignition models, press the button once. Release the “Trip” button when the trip meter is set to all zeros, and you’re done.
Amazingly, how do you reset the maintenance required light on a 2006 Toyota Sienna? Turn off the car, and hold down the odometer button. Turn the key to the on position without starting the car. Wait for the maintenance light to blink and go out, while still holding down the button. Finally, release the button and turn the key to the off position.
Also the question is, how do you reset the maintenance light on a 2004 Toyota Sienna?
Toyota Maintenance Required Light: This light comes on to remind you to change your oil. It comes on 5,000 miles after the last time it was reset. … Sometimes shops neglect to reset the maintenance-required meter if the light doesn’t happen to be on yet when they are changing the oil.Why is the maintenance required light on?
The purpose of the maintenance required light is to encourage drivers to take their vehicle in for regular scheduled maintenance, such as oil changes, spark plugs, new tires, etc. Normally, automotive specialists will reset the maintenance required light when servicing your vehicle.
Why is my maintenance required light still on after oil change?
Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.
How do you reset the maintenance light on a Toyota Sienna 2020?
Can I drive with maintenance required light on?
Secondly, resetting the maintenance required light after you have changed the oil restarts the counter. As a result, you can drive safely on roads and after 5,000 miles, this light will automatically remind you it’s time for a new oil change, so you don’t have to count the miles manually.
How do I reset my 2006 Toyota Sienna?
How do you reset the maintenance required light on a 2012 Toyota Sienna?
How do you reset the maintenance required light on a 2010 Toyota Sienna?
- With vehicle ignition switched to ON position, make sure odometer reading is shown, then turn the ignition switch to OFF position.
- While holding reset button, switch ignition to ON position.
- Continue to hold the reset button until the odometer displays “000000” and/or the MAINT REQD light goes off.
How do you reset the maintenance light on a 2003 Toyota Sienna?
How do you reset the maintenance required light on a 2014 Toyota Sienna?
Is maintenance required the same as check engine?
Some drivers may confuse the service required or maintenance required light on the gauge cluster for the check engine light. These warning lights are unrelated. The service required light just means the car is due for an oil change or other routine care. It is not an indicator of trouble like the check engine light is.